DIY Appliance Repair Tips

Wait! Before you pick up the phone to call for appliance repair in Corona California for assistance, you might be able to keep your household appliances running smoothly with the help of the tips below.

1. Smelly Washing Machine

A bad smell in your washer defeats the entire point of owning the appliance! If you’re attempting to get your clothes so they’re clean and fresh, but your machine isn’t cooperating, run an cycle with no clothes/laundry in hot water with two cups of white vinegar and a half-cup of baking soda to remove the unpleasant smell. This issue commonly occurs in front-loading washing machines. To eliminate smells in the future, prop the door open in between cycles to let it dry out.

2. Inefficient Refrigerant

A warm refrigerator is never a good sign. A warm refrigerator won’t keep liquids cool, and the food inside of it could also be in danger of becoming spoiled! In several cases, your refrigerator will not require professional repair; instead the inside could just need to be cleaned. Or the coils on the rear of the appliance require cleaning.

Unplug the appliance and move it away from the wall before vacuuming the refrigerator coils. If you can’t see instant cooling improvement, it’s a good idea to hire a professional appliance repair service in Corona for troubleshooting.

3. Clicking Igniter on Stove

If the igniter on a gas oven clicks and clicks and the burner doesn’t light, inspect to make sure your burner lid is on tight and properly aligned. You may also notice this problem if you have recently had a boil over or liquid spill on the stovetop.

Otherwise, the cause is probably a dirty igniter. To clean , take off the burner lid and wipe off any loose particles. You can also use a metal pin to scrape dirt from the grooves of the igniter. If that doesn’t eliminate the issue, it’s safest not to disassemble a lighter unless you have proper training; in this case call a professional appliance repairman to investigate the issue.

4. Broken Garbage Disposal

A garbage disposal includes self-protection with its own overload trip switch. If it becomes filled up, overheats, is left on for too much time, or has a different problem, the garbage disposal might just need to be reset rather than replaced. Be sure the power switch is OFF. Next, find the reset switch on the disposal unit beneath the sink and press the switch. If the switch does not stay pushed in, wait 10 minutes and press it again. Turn on the water from the faucet and then turn the button on.

If the garbage disposal in the sink is filled up with debris and you the only noise you hear is a humming noise rather than the grinding of waste, you could need to turn the disposal blades using a hex key tool to eliminate the jam. Then, press the reset switch to get the disposal running again. If these tips are unable to get the appliance working like it should, do not give in to the urge to push one of your arms down in the blades to figure things out. Be safe and schedule an appointment with a professional appliance service in Corona.

5. No Power from Outlet

In the bathroom or kitchen, the outlets must be equipped with GFCI capabilities to protect homeowners against harm in wet areas. If a GFCI outlet isn’t generating power, push the red switch to see if it will restore power.

If it doesn’t, or if you are trying a typical electrical outlet, be sure that a breaker has not tripped in the home’s circuit breaker panel. If you are not sure if a circuit breaker is tripped, flip it to the OFF position and then flip it back onto the ON position. Just remember, safety around electricity is critical. If you have concerns, call a professional.

6. Wobbling Washing Machine

A shaking washing machine will often create quite a loud racket and is not a productive way to wash laundry. If your washing machine is abruptly shaking, the washer might be broken down. To fix this issue, turn the legs on the machine to lower or lift each of the corners until it’s balanced. Another likely scenario is the washing machine is off balance. Open the lid and rearrange the shirts and pants so they are evenly dispersed within the drum{| of the washer.

Doing this should help your washer not need to work quite as hard. If you do attempt to arrange the clothes once or twice without success, don’t ignore the issue. You could have a loose motor or drum mount to deal with, which can be easy enough for a professional to fix. But if you continue to run your washer with this problem could break some of the other parts and result in a bigger repair later.

Call for Help

If these suggestions can fix your problems, you will want to schedule an appointment from Corona Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Repair or Replace Appliances
Emergency Appliance Repair